Ethernet Testers
Ethernet Testers
Taetron’s ethernet testers are devices used to test and troubleshoot ethernet network connections. These testers help verify the integrity and performance of ethernet cables, connectors, and network devices such as switches, routers, and network interface cards (NICs). Our ethernet testers are used by network technicians, IT professionals, and system administrators to ensure the proper functioning of ethernet networks.
Taetron’s ethernet testers are composed of a handheld tester unit, LCD screen or display, control buttons or touchscreen interface, ethernet ports or connectors, power source, and cable connectors.
10 Gigabit Ethernet Tester with 7-Inch Touchscreen – Taetron
High-performance 10Gb Ethernet tester featuring a 7-inch touchscreen, 8GB storage, and 4-hour battery life for advanced FTTX netORK TESTING.
Technical Specifications
| Network | LAN, Ethernet |
| Display | 7 in (17.78 cm) TFT color touch screen 960 pixels x 480 pixels |
| Interface | USB 2.0 port; RJ-45 LAN |
| Storage Capacity | 8 GB |
| Battery | Rechargeable lithium battery |
| Working Time | More than 4 hrs |
4-Channel Fiber Ethernet Converter with 1.5G Bandwidth – Taetron
Reliable 4-Channel fiber Ethernet converter with 1.5G bandwidth, VLAN support, RS232/RS485 options, and remote management capabilities.
Technical Specifications
| Transmission Distance | 1.24 mi (2 km) to 74.56 mi (120 km) |
| Bandwidth | 1.5 G |
| Wavelength | 1310 nm |
| Receiver Sensitivity | -27 dBm |
| Allowed Attenuation | 0 dBm to 6 dBm |
| Power Consumption | ≤10 W |
Advanced CAT Network Tester for Cable Performance – Taetron
Versatile tester for CAT 3, 5e, and 6 cables, featuring multi-connector support and storage for 100 results to ensure optimal network performance.
Technical Specifications
| Accuracy | ± 4.92 ft (± 1.5 m) |
| Length | 0 mi to 0.109 mi (0 m to 176 m) (UTP) 0 mi to 0.12 mi (0 m to 200 m) (Coax) |
| Propagation Delay | 0 ns to 850 ns |
| Delay Skew | 0 ns to 100 ns |
| DC Resistance | 0 ohm to 100 ohm |
| RF Frequency | 1 MHz to 250 MHz |
Advanced Ethernet Tester with 39.76 mi Range & 8-Hour Battery – Taetron
Experience precision testing with a 39.76 mi range, 8-hour battery life, and a user-friendly touchscreen interface.
Technical Specifications
| Dynamic Range | 26 dB or 24 dB |
| Event Blind Zone | 8.2 ft (2.5 m) |
| ATT Blind Zone | 26.24 ft (8 m) |
| Test Range | 0.31 mi or 0.6 mi or 1.2 mi or 2.4 mi or 4.9 mi or 9.9 mi or 19.88 mi or 39.76 mi or62.13 mi (500 m or 1 km or 2 km or 4 km or 8 km or 16 km or 32 km or 64 km or 100 km) |
| Pulse Width | 3 ns or 5 ns or 10 ns or 20 ns or 30 ns or 50 ns or 80 ns or 160 ns or 320 ns or 550 ns or 800 ns or 1 μs or 2 μs or 3 μs or 5 μs or 8 μs or 10 μs or 20 μs |
| Ranging Accuracy | ± (3.28 ft (1 m) + Sample interval + 0.005% x Test distance) |
Advanced Ethernet Tester with 5 in Display, Ergonomic Design – Taetron
This Ethernet tester features a 5 in display and ergonomic design, ensuring portability and ease of use for network testing tasks.
Technical Specifications
| Optical Interface | Two GigE interfaces |
| Wavelength | 850 nm |
| Laser type/ Connector/ transceiver type | VCSEL/LC/SFP |
| Test Items | |
| Y.1564 | Perform network configuration and service testing according to ITU. T Y.1564. Remote loopback or dual testing device mode can be used for testing to obtain bidirectional results. |
| RFC2544 | According to RFC 2544, it can measure throughput, back-to-back, frame loss, and delay. Frame size: RFC defined size; user can configure 1 to 7 types. |
Advanced Ethernet Tester with 6.56 ft Blind Zone & 0.01 dB Resolution – Taetron
Advanced OTDR with large touch screen, long battery life, intelligent testing, and wide wavelength options. Features dustproof, shockproof design.
Technical Specifications
| Wavelength | 850 nm or 1300 nm, 1310 nm or 1490 nm or 1550 nm |
| Dynamic Range | 23 dB or 21 dB, 32 dB or 30 dB, 34 dB or 32 dB, 36 dB or 34 dB, 38 dB or 36 dB, 34 dB or 32 dB or 32 dB, 38 dB or 36 dB or 36 dB |
| Pulse Width | 5 ns,20 ns, 40 ns, 80 ns, 160 ns, 320 ns, 640 ns, 1280 ns, 2560 ns, 5120 ns, 10240 ns, 20480 ns |
| Event Blind Zone | 6.56 ft (2 m) |
| Attenuation Blind Zone | 29.52 ft (9 m) |
| Linearity | ±0.05 dB or dB |
| Loss Threshold | 0.05 dB |
Taetron Intelligent Handheld Network Tester
GAOTek Intelligent Handheld Network DSL tester specially designed for slid line test (xDSL include ADSL, ADSL2, ADSL2+, READSL, VDSL2 etc) and maintenance
Features
- Supports all multi-protocol, PPPoE or PPPoA (LLC or VC MUX)
- Connects to CO via alligator clip or RJ11
- Rechargeable Li ion Battery
- Beep and LEDs alarm indications (Lower Power PPP LAN x DSL)
- Data memory fuction
- LCD display Menu operation
- Auto shut off if no any operation on keyboard
- Compliant with all known DSLAMs
- Software management
- Simple, portable and money-saved
Taetron Lan Ethernet Cable Tester
This Lan Ethernet Cable Tester has 3% accuracy (after calibration), 3.7 V lithium battery 1800 mAh, and 10 m minimum distance of calibration.
Features
- PoE testing, length testing, port flash, ping testing
- Trace targeted cable among lots of unknown cables
- Locate faults for RJ11, RJ45, BNC cable
- Measure cable length accurately
- Voltage detecting function
- Memory and storage function
- Export or upload data from PC
- Lithium battery and colour screen
Taetron Lan Network Cable Tester
This Lan Network Cable Tester hasan altitude of 2000 m, 125 Khz output signal, LCD display screen, and power supply 3.7 V 1400 mAh battery.
Features
- Can measure 12 V to 400 V AC, DC voltage
- Automatic or manual mode can be switched at will
- The use of multiple transmitters to classify or determine the laid lines
- High voltage measurement, zero contact
- Turn on the flashlight function in dark environment
- Detect pipes in walls
- Detect the line direction or break point and short circuit buried in the wall
Taetron’s ethernet testers have the following functions:
- Cable testing: Our ethernet testers perform continuity tests to ensure all wires within ethernet cables are properly connected, detect wiring faults such as open circuits or crossed wires, and accurately measure cable length for efficient troubleshooting and cable management.
- Link testing: Taetron’s ethernet testers assess network connectivity by measuring response time (round-trip time) to identify delays, detect packet loss to troubleshoot network congestion or quality issues, and measure throughput to determine the actual data transfer rate, helping identify performance bottlenecks.
- Performance testing: Our ethernet testers evaluate network performance by measuring metrics such as bandwidth to ensure it meets desired requirements, measuring the latency to detect delays in data transmission, and measuring jitter to identify variations in latency that may affect real-time applications or voice/video communications.
- PoE testing: Taetron’s ethernet testers validate power over ethernet (PoE) functionality by detecting power delivery to PoE-enabled devices, ensuring they receive power, and measuring power levels to verify compliance with specified ranges, assisting in troubleshooting power-related issues and ensuring reliable power supply in network deployments.
- VLAN testing: Our ethernet testers verify VLAN configurations by checking VLAN tagging to ensure correct addition and recognition of VLAN tags by network devices, validate VLAN membership to ensure devices are assigned to the appropriate VLANs, and verify VLAN trunking to ensure proper transportation of VLAN traffic between switches, enabling proper VLAN segmentation, isolation, and communication within the network.
Taetron’s ethernet testers are rugged, versatile and precision measurement instruments. They comply with applicable industry standards such as TIA/EIA, ISO/IEC, IEEE, ANSI/TIA-568-C, EN, RoHS, FCC, and CE.
Our ethernet testers help our customers comply with relevant U.S. government regulations such as:
- FCC Part 15 (Radio Frequency Devices)
- RoHS (Restriction of Hazardous Substances)
- NEBS (Network Equipment Building System) standards
- EPEAT (Electronic Product Environmental Assessment Tool)
Taetron’s ethernet testers help our clients in complying with relevant Canadian government regulations such as:
- ISED (Innovation, Science and Economic Development Canada) regulations
- ICES (Interference-Causing Equipment Standard)
- Energy Efficiency Regulations (applicable to power consumption
Our ethernet testers have the following applications:
- Network installation and verification: Taetron’s ethernet testers are used during the initial setup and installation of network infrastructure to verify cable connectivity, test link connections, and ensure proper configuration.
- Cable and connectivity testing: Our ethernet testers are used for testing and certifying Ethernet cables, ensuring they meet industry standards and are free from faults or wiring errors. These testers verify cable continuity, detect wiring faults, measure cable length, and identify issues such as open circuits, short circuits, or crossed wires.
- Network troubleshooting and diagnostics: Taetron’s ethernet testers are valuable tools for troubleshooting network connectivity problems. These devices help identify faulty cables, diagnose link failures, detect network latency issues, and locate network performance bottlenecks.
- Performance measurement and optimization: Our ethernet testers enable the measurement of key performance metrics such as bandwidth, latency, and throughput. By evaluating network performance, these testers help identify areas for improvement, optimize network configurations, and ensure efficient data transfer.
- Power over Ethernet (PoE) testing: Taetron’s ethernet testers assist in testing and verifying power over ethernet (PoE) functionality. These devices can detect and measure power levels delivered to PoE-enabled devices, ensuring proper power supply and troubleshooting power-related issues.
Our ethernet testers can be shipped overnight within the continental U.S. and Canada, and can be shipped globally.