ELECTRICAL TESTERS

Taetron provides a collection of electrical product testers such as spectrum analyzers, digital oscilloscopes, digital multimeters, logic analyzers and generators. Our products offer technicians and field professionals the best for a variety of electrical testing applications. The Taetron Electrical Testers are designed to check non-contact to contact voltage, continuity detection, circuit problems, open jaw current and motor phase rotation-testing. They also ensure voltages are correct for specific tasks.

8.4 GHz Vector Network Analyzer with Spectrum Analysis – Taetron

GAOTek 8.4 ghz vector network analyzer with spectrum analysis are signal analyzers with a frequency range of 9 kHz to 8.4 GHz. It can be used as the main equipment required to build an automatic control system. At the same time, it can meet your different testing and application needs in the testing systems required for enterprise R&D/factory production/education and scientific research, etc.

Features

Excellent selectivity
VNA Vector Network Analysis
Real Time Spectrum Mode
FMT Mask
VSA Vector Signal Analysis
Analog Demodulation Analysis
EMI analysis
One-key advanced measurement

Advanced High-Speed Oscilloscope with 8 GHz Bandwidth – Taetron

Taetron advanced high-speed oscilloscope with 8 ghz bandwidth oscilloscopes incorporate innovative technology designed to deliver superior measurements. Whether you are testing multiple high-speed serial lanes or a massive parallel bus, the new 12.5 Gb/s, exceptionally long 160-bit hardware serial trigger and fast 20 GSa/s digital channels will provide timely validation and debug. Our oscilloscope’s low-noise front end technology, advanced InfiniiMax Ultra probe delivers up to 25 GHz bandwidth with an RC input impedance profile, providing the extremely low mid-band loading necessary to address modern high speed probing requirements.

Features

8 GHz analog bandwidth (upgradable)
4 analog plus 16 digital channels
Capture a longer signal trace with up to 80 GSa/s sample rate and 2 Gpts of acquisition memory
Low noise (1.04 mVrms at 50 mV/div) and jitter measurement floor (100 fs)
See better measurement accuracy with ENOB values in excess of 5.5 and a SFDR exceeding 50 dBC
Access the broadest range of jitter, trigger, analysis and protocol tools (featuring Precision Probe)

Advanced Spectrum Analyzer with 44 GHz Frequency Range – Taetron

Advanced Spectrum Analyzer with a 44 GHz range, high accuracy, and fast sweep time, ideal for precision RF measurements and data storage.

Technical Specifications

Frequency range	10Hz to 44GHz
Frequency resolution	2Hz
Resolution bandwidth	1 Hz to 1.3 MHz
Frequency span	0 Hz (zero span), 10 Hz to the maximum frequency of instrument
Video range	1 Hz to 3 MHz (10 % steps), 4, 5, 6, 8 MHz, and wide open (labeled 50 MHz)
Accuracy	± 6 %, nominal
Sweep trace point range (All spans)	1 to 40001

Advanced Waterproof GPS Tracker with Fall Detection & Geo-Fence – Taetron

Waterproof GPS Tracker with SOS call, fall detection, and GPS + Beidou positioning for reliable location and safety alerts.

Technical Specifications

4G-FDD	Band 1 / 2 / 4 / 5 / 7 / 12 / 13 / 17
3G-WCDMA	Band 1 / 2 / 5
2G-GSM	Band 2 / 5
GPS locating time	30 s with cold boot (open sky) 29 s with warm boot (open sky) 5 s with hot boot (open sky)

Clamp Meter for Measuring Currents with 2000A AC & 1000V DC – Taetron

Clamp meter for measuring currents with 2000A AC & 1000V DC offers precise measurement capabilities for currents up to 2000A AC.

Technical Specifications

Power	9V battery (6F22)
Display	1.69 in × 1.18 in (4.3 cm x 3 cm)
keyword1	Clamp Meter
keyword2	Clamp Meter measuring currents
keyword3	measuring currents
Lead time (days)	8 (To be negotiated)

DC Hipot Test Kit 60kV 120kV with Great Voltage Stability – Taetron

DC Hipot Test Kit 60kV 120kV adopts a high-frequency voltage double circuit, advanced PWM high-frequency pulse width modulation technology, closed-loop adjustment, and large voltage feedback, which greatly improves voltage stability.

Features

Series dc high voltage generators have small ripple coefficient, stable and reliable voltage output, no noise, and good reliability
With overvoltage, overcurrent, zero voltage start and fault protection, voltage protection value can be set, display intuitive
Voltage, current using digital display, and power supply has a reading, easy to monitor the output status
With 0.75 times voltage conversion, easy to test zinc oxide arrester
The product structure is compact, small size, easy to carry ant print test data.

Digital Clamp Phase Meter with InGaAs Detector and 300 Hour Battery – Taetron

Digital Clamp Phase Meter for AC Signals, InGaAs Detector, 60-Hour Battery, 1310/1550 nm Wavelength, with Rugged Design & Universal Interface.

Features

Rugged design
Interchangeable connector adapters
300 hours of battery life
Tone recognition for ½ ber ½ cation
Universal push-pull interface
Reference function for direct loss measurements

Digital Precision LCR Meter Tester with 32-bit Core Processor – Taetron

Digital Precision LCR Meter has 5-digit LCD, 0.01 mΩ to 99.999 mΩ range, 32-bit processor, and 600 memory sets.

Features

32-bit core processor
5-digit 4.3-inch TFT LCD display
2 signal source output impedance 30 Ω, 100 Ω
List mode function, 10 steps
100 sets memories for internal storage/save
500 memories for U disk storage/save, supports FAT16 and FAT32 files
Save the last parameter settings before power off
Standard interface: RS-232, HANDLER, USB HOST

Durable 4G GPS Tracker with Geo-fence, Fall Detection & IP67 Rating – Taetron

Compact 4G LTE GPS tracker with real-time tracking, SOS, geo-fence, fall detection, and IP67 waterproof. Lightweight with up to 72 hrs active use.

Features

Aluminum alloy material, lightweight and easy to dissipate heat
GPS locator
SOS emergency call
Real-time tracking
Fall detection
Geo-fence alarm
Location History

Durable Vehicle GPS Tracker with IP67, Geo-Fence & Real-Time – Taetron

Advanced vehicle GPS tracker with IP67, real-time updates, geo-fence, and over-speed alerts for comprehensive vehicle management.

Technical Specifications

GSM/CDMA Module	QUECTEL M35
Track view	PC, IOS APP, SMS Coordinate, Android APP
GSM Frequency	850 MHz, 900 MHz, 1800 MHz or 1900 MHz
MCU Processor	ARM7 STM103FRCT6
Internal Memory	4MB (20000 Waypoints + Events)
Input Port	Ignition, Door, Panic, Charger Control, Microphone

Full Touch 4-Channel Oscilloscope with Robust Hardware Design – Taetron

Full Touch 4-channel oscilloscope is a digital oscilloscope 4 channel with 100 MHz and 70 Mbps depth with an 8-inch LCD display and a touch screen, as well as integrated software for car diagnostics.

Features

Robust hardware design, intuitive Android operation system
32G internal storage to save data or videos or screenshots
Excellent connectivity: Wi-Fi, HDMI, USB 3.0 or 2.0, Type-C
Support various protocol decoding: UART, CAN, LIN, SPI, I2C
8″ capacitive integrated screen brings premium touch experience
Innovative PC & Smartphone App remote control
Up to 5 hrs battery life & compact size, perfect for field work
Intelligent bi-directional probe interface to Missing UPI
Special power-off switch lock, safe to travel and store

Taetron DDS Function Generator with Arbitrary Waveform Function

This logic analyzer with arbitrary waveform function provides a sampling rate of 100 Msa/s, a vertical resolution of 8 bit and a waveform length of 1 kpts based on Direct Digital Synthesis (DDS) technology

Features

5’’ TFT LCD display
Modulations: FM, FSK, ASK, PSK
Direct Digital Synthesis technology (DDS)
Optional power amplifier
output frequency 5 MHz/10 MHz/15 MHz/20 MHz
2 output channels
output amplitude 1 mV (50 Ω) with good stability
Sampling rate 100 MSa/s, vertical resolution 8 bit, waveform length 1024 points
Arbitrary waveform function
32 built-in waveforms and 8 user-defined arbitrary waveforms

Taetron GHz Mixed Signal Oscilloscope 4/ 6 /8 Channels

Taetron Mixed Signal and Digital Phosphor Oscilloscope is versatile instrument designed for precise signal analysis.

Features

Versatile mixed-signal oscilloscope (MSO)
Four analog channels for precise signal analysis
Real-time sampling mode for accurate waveform capture
High sampling rate of up to 2.5 GS/s
DC/AC input coupling for flexible signal measurements
Clear and vibrant 10.1-inch TFT color display
8-bit vertical resolution for detailed signal representation
Convenient USB 2.0 connectivity for data transfer
Sturdy and protective moisture-proof and anti-collision transport package

Taetron Mixed Signal Oscilloscope

Taetron Mixed Signal Oscilloscopes are advanced test and measurement devices that combine the capabilities of analog oscilloscopes and digital logic analyzers.

Features

Combines analog oscilloscope and digital logic analyzer capabilities
Simultaneous capture and analysis of analog and digital signals
Analog channels for measuring continuous waveforms
Digital channels for capturing and analyzing digital signals
Variable bandwidth options
Adjustable sample rate
Ample memory depth for waveform storage
User-friendly display controls
Triggering options for precise signal capture
Specific features may vary depending on the model

Taetron Mixed Signal Oscilloscope with Analog Channels

Taetron Mixed Signal Oscilloscope with analog channels is an advanced electronic test and measurement device that combines the features of a traditional analog oscilloscope and a digital logic analyzer.

Features

Combines analog oscilloscope and digital logic analyzer capabilities
Simultaneous capture and display of analog and digital signals
Multiple analog channels for measuring continuous waveform signals
Bandwidth for accurate capture of high-frequency signals
Sample rate for precise signal sampling
Memory depth for storing and analyzing waveform data
User-friendly display and controls
Triggering options for capturing specific events or patterns
Additional features like waveform generation and protocol decoding

Taetron Multifunctional Mixed Domain Digital Oscilloscope

Taetron Multifunctional Mixed Domain Digital Oscilloscope is an advanced electronic test and measurement device that combines analog and digital signal analysis capabilities.

Features

300/200/100MHz bandwidth selections, 2 channels
Real time sampling rate is 2GSa/s max.
Per Channel 20M memory depth and VPO waveform display technology
Waveform update rate up to 120,000 wfms/s
8 ” WVGA TFT LCD display
Maximum 1M FFT provides higher frequency domain resolution measurements
High, low and band pass filter functions
29,000 segmented memories and waveform search functions
I2C/UART/CAN/LIN serial bus trigger and decoding function
Data log function is able to track signal changes up to 1000 hours
Network storage function
Mask test function
MDO-2000AG equips with a dual channel 25MHz AWG

Taetron Clamp Energy Meter

Taetron clamp energy meter has three phase voltage, current, power, power factor, frequency, etc. measurement. Voltage deviation, demand and max and min value, Voltage or Current imbalance, phase angle measurement, 2 to 31^st harmonics content and THD.

Features

Intelligent distribution management system
Internal energy consumption statistical analysis and charging statistics
Energy metering, automatic meter reading system
Energy and energy efficiency management system

Taetron Electrical Safety Analyzer

This Electric Safety Analyzer has an environment temperature of 14 °F to 104 °F, relative humidity of 40% to less than 80%, and storage mode of 100 s.

Technical Specifications

Input Impedance	Input impedance of test voltage: 1 M Ω.
Withstand Voltage	Withstand 3700 V/50 Hz sinusoidal AC voltage for 1 minute between instrument wiring and shell.
Insulation	Between instrument wiring and shell ≥ 10 M Ω.
Structure	Double insulation, with insulation vibration-proof sheath.
Safely Rules	IEC 61010 1000V Cat III or 600V CAT IV, IEC61010-031, IEC61326, Pollution degree: 2.
Working Temperature And Humidity	14 °F to 104 °F (-10 °C to 40 °C); below 80% Rh.
Storage Temperature And Humidity	14 °F to 140 °F (-10 °C to 60 °C); below 70% Rh.